TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Pressure drop
Flow control valves
4.05.001.1
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 250 bar ( 3.626 psi)
Flow rate: 17 l/min 4,5 gpm)
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 200 cc/min
P max 350 bar (5.075 psi)
Standard seals: O-ring NBR
Seal Polyurethane
Cavity: SCN1020
Installation torque: 40 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seals kit std.: 5AG0026
Description
2 way flow control valve unidirectional pressure compesated.
Operation mode
The valve keep a constant flow rate out of port 2 regardless of load
pressure changes on port 2, or upstream of port 1.
GENERAL DATA
Weight without coil: 0,14 Kg (0,3 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals (NBR).
Max. proof pressure: 350 bar (5.075 psi).
Flow Max: 17 l/min (4,5 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
F10C-21F
Fix setting compensated
2 way flow control valve
0
5
10
15
20
0 50 100 150 200 250
0
1
2
3
4
5
0 1000 2000 3000
Flow lpm
gpm
Pressure psi
bar
Priority flow vs. load Inlet 250 bar (3625 psi)
TCGE-0524-IR00
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
Seals
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR+Polyurethane)
Y- Polyurethane
Inches
Millimeters
-
Dimensions
For other options
contact Sales dept.
Regulated flow
None (std. only cartridge)
0,4
0,4 - 0,4 l/min (0,10 gpm)
1
1 - 1 l/min (0,26 gpm)
2
2 - 2 l/min (0,52 gpm)
4
- 4 l/min (1,06 gpm)
6
6 - 6 l/min (1,58 gpm)
8
8 - 8 l/min (2,11 gpm)
10
10 - 10 l/min (2,64 gpm)
13,5
13,5 -13,5 l/min (3,57 gpm)
17
17- 17 l/min ( 4,49 gpm)
4B- 1/2” BSP
3B- 3/8” BSP
4S- SAE 10
3S- SAE 8
STANDARD HOUSING
Ordering code: See page 9.03.001
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
4.05.001.2
F10C-21F
F10C-21F
+H[
81)$
5
